Panels Designs

Download, cut, and install—these files let you create professional decorative panels in just a few easy steps:

• Digital File Setup:
  Open the STL in any CAM software, set your work zero, create two toolpaths (roughing then finishing), and export G-code compatible with your CNC machine.
• Material Selection:
  • High-density MDF – economical and easy to paint.
  • Solid woods like oak or beech – premium look.
  • Foamed PVC – lightweight and simple to mount.
• Running on a CNC Router:
  Secure the board firmly. Use a 6 mm end mill for roughing at 1 500–2 500 mm/min, then a 3 mm ball-nose bit for finishing with a 10–15 % step-over. Leave a 0.3 mm allowance during roughing and remove it in the finishing pass for a smooth surface.
• Surface Finishing:
  Sand progressively (120 → 240 → 400 grit), apply pore sealer on open-grain woods, spray two light coats of primer, then finish with polyurethane or metallic pearl paint and add a UV-protective varnish if needed.
• Trimming & Installation:
  Square the edges with a table saw or flush-trim bit. Mount panels using hidden screws plus PU construction adhesive (or magnetic clips for easy removal). Fill seams with color-matched wood filler and give a final light sand.
• Bundle Advantages:
  40 panel designs at 0.01 mm accuracy, covering floral, geometric, and classic motifs, easily rescaled in any CAM program—buy once, reuse indefinitely for personal or commercial projects.